Requests For Comments ... for the community
Welcome to OpenRFC
Home Full RFC index RFC humour Our technology
<< Previous <<      RFC 5721      >> Next >>    
POP3 Support for UTF-8.
R. Gellens, C. Newman. February 2010.

[Direct link][Download PDF version][Download text version]

Internet Engineering Task Force (IETF) R. Gellens Request for Comments: 5721 QUALCOMM Incorporated Category: Experimental C. Newman ISSN: 2070-1721 Sun Microsystems February 2010 POP3 Support for UTF-8 Abstract This specification extends the Post Office Protocol version 3 (POP3) to support un-encoded international characters in user names, passwords, mail addresses, message headers, and protocol-level textual error strings. Status of This Memo This document is not an Internet Standards Track specification; it is published for examination, experimental implementation, and evaluation. This document defines an Experimental Protocol for the Internet community. This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Not all documents approved by the IESG are a candidate for any level of Internet Standard; see Section 2 of RFC 5741. Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at Copyright Notice Copyright (c) 2010 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents ( in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Gellens & Newman Experimental [Page 1]
RFC 5721 POP3 Support for UTF-8 February 2010 This document may contain material from IETF Documents or IETF Contributions published or made publicly available before November 10, 2008. The person(s) controlling the copyright in some of this material may not have granted the IETF Trust the right to allow modifications of such material outside the IETF Standards Process. Without obtaining an adequate license from the person(s) controlling the copyright in such materials, this document may not be modified outside the IETF Standards Process, and derivative works of it may not be created outside the IETF Standards Process, except to format it for publication as an RFC or to translate it into languages other than English. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1. Conventions Used in This Document . . . . . . . . . . . . 3 2. LANG Capability . . . . . . . . . . . . . . . . . . . . . . . 4 3. UTF8 Capability . . . . . . . . . . . . . . . . . . . . . . . 6 3.1. The UTF8 Command . . . . . . . . . . . . . . . . . . . . . 7 3.2. USER Argument to UTF8 Capability . . . . . . . . . . . . . 9 4. Native UTF-8 Maildrops . . . . . . . . . . . . . . . . . . . . 9 5. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 10 6. Security Considerations . . . . . . . . . . . . . . . . . . . 10 7. References . . . . . . . . . . . . . . . . . . . . . . . . . . 10 7.1. Normative References . . . . . . . . . . . . . . . . . . . 10 7.2. Informative References . . . . . . . . . . . . . . . . . . 11 Appendix A. Design Rationale . . . . . . . . . . . . . . . . . . 12 Appendix B. Acknowledgments . . . . . . . . . . . . . . . . . . . 12 Gellens & Newman Experimental [Page 2]
RFC 5721 POP3 Support for UTF-8 February 2010 1. Introduction This document forms part of the Email Address Internationalization (EAI) experiment described in the EAI Framework document [RFC4952] (for background, please see the charter of the EAI working group) and should be evaluated within the context of EAI. As part of the overall EAI work, email messages may be transmitted and delivered containing un-encoded UTF-8 characters, and mail drops that are accessed using POP3 [RFC1939] might natively store UTF-8. This specification extends POP3 [RFC1939] using the POP3 extension mechanism [RFC2449] to permit un-encoded UTF-8 [RFC3629] in headers, as described in "Internationalized Email Headers" [RFC5335]. It also adds a mechanism to support login names and passwords outside the ASCII character set, and a mechanism to support UTF-8 protocol-level error strings in a language appropriate for the user. This document updates POP3 [RFC1939], and the fact that an Experimental specification updates a Standards Track specification means that people who participate in the experiment have to consider the Standard updated. In an attempt to reduce confusion, this Experimental document does not contain an "Updates" header. If and when a version of this document moves to the Standards Track, an "Updates: 1939" header should be added. Within this specification, the term "down-conversion" refers to the process of modifying a message containing UTF8 headers [RFC5335] or body parts with 8bit content-transfer-encoding, as defined in MIME Section 2.8 [RFC2045], into conforming 7-bit Internet Message Format [RFC5322] with message header extensions for non-ASCII text [RFC2047] and other 7-bit encodings. Down-conversion is specified by "Downgrading Mechanism for Email Address Internationalization" [RFC5504]. 1.1. Conventions Used in This Document The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in "Key words for use in RFCs to Indicate Requirement Levels" [RFC2119]. In examples, "C:" and "S:" indicate lines sent by the client and server, respectively. If a single "C:" or "S:" label applies to multiple lines, then the line breaks between those lines are for editorial clarity only and are not part of the actual protocol exchange. Gellens & Newman Experimental [Page 3]
RFC 5721 POP3 Support for UTF-8 February 2010 Note that examples always use 7-bit ASCII characters due to limitations of this document format; in particular, some examples for the "LANG" command may appear silly as a result. 2. LANG Capability Per "POP3 Extension Mechanism" [RFC2449], this document adds a new capability response tag to indicate support for a new command: LANG. The capability tag and new command are described below. CAPA tag: LANG Arguments with CAPA tag: none Added Commands: LANG Standard commands affected: All Announced states / possible differences: both / no Commands valid in states: AUTHENTICATION, TRANSACTION Specification reference: this document Discussion: POP3 allows most +OK and -ERR server responses to include human- readable text that, in some cases, might be presented to the user. But that text is limited to ASCII by the POP3 specification [RFC1939]. The LANG capability and command permit a POP3 client to negotiate which language the server should use when sending human- readable text. A server that advertises the LANG extension MUST use the language "i-default" as described in [RFC2277] as its default language until another supported language is negotiated by the client. A server MUST include "i-default" as one of its supported languages. The LANG command requests that human-readable text included in all subsequent +OK and -ERR responses be localized to a language matching the language range argument (the "Basic Language Range" as described Gellens & Newman Experimental [Page 4]
RFC 5721 POP3 Support for UTF-8 February 2010 by [RFC4647]). If the command succeeds, the server returns a +OK response followed by a single space, the exact language tag selected, another space, and the rest of the line is human-readable text in the appropriate language. This and subsequent protocol-level human- readable text is encoded in the UTF-8 charset. If the command fails, the server returns an -ERR response and subsequent human-readable response text continues to use the language that was previously active (typically i-default). The special "*" language range argument indicates a request to use a language designated as preferred by the server administrator. The preferred language MAY vary based on the currently active user. If no argument is given and the POP3 server issues a positive response, then the response given is multi-line. After the initial +OK, for each language tag the server supports, the POP3 server responds with a line for that language. This line is called a "language listing". In order to simplify parsing, all POP3 servers are required to use a certain format for language listings. A language listing consists of the language tag [RFC5646] of the message, optionally followed by a single space and a human-readable description of the language in the language itself, using the UTF-8 charset. Examples: < Note that some examples do not include the correct character accents due to limitations of this document format. > < The server defaults to using English i-default responses until the client explicitly changes the language. > C: USER karen S: +OK Hello, karen C: PASS password S: +OK karen's maildrop contains 2 messages (320 octets) < Client requests deprecated MUL language. Server replies with -ERR response. > C: LANG MUL S: -ERR invalid language MUL < A LANG command with no parameters is a request for a language listing. > Gellens & Newman Experimental [Page 5]
RFC 5721 POP3 Support for UTF-8 February 2010 C: LANG S: +OK Language listing follows: S: en English S: en-boont English Boontling dialect S: de Deutsch S: it Italiano S: es Espanol S: sv Svenska S: i-default Default language S: . < A request for a language listing might fail. > C: LANG S: -ERR Server is unable to list languages < Once the client changes the language, all responses will be in that language, starting with the response to the LANG command. > C: LANG es S: +OK es Idioma cambiado < If a server does not support the requested primary language, responses will continue to be returned in the current language the server is using. > C: LANG uga S: -ERR es Idioma <<UGA>> no es conocido C: LANG sv S: +OK sv Kommandot "LANG" lyckades C: LANG * S: +OK es Idioma cambiado 3. UTF8 Capability Per "POP3 Extension Mechanism" [RFC2449], this document adds a new capability response tag to indicate support for new server functionality, including a new command: UTF8. The capability tag and new command and functionality are described below. CAPA tag: UTF8 Arguments with CAPA tag: USER Gellens & Newman Experimental [Page 6]
RFC 5721 POP3 Support for UTF-8 February 2010 Added Commands: UTF8 Standard commands affected: USER, PASS, APOP, LIST, TOP, RETR Announced states / possible differences: both / no Commands valid in states: AUTHORIZATION Specification reference: this document Discussion: This capability adds the "UTF8" command to POP3. The UTF8 command switches the session from ASCII to UTF-8 mode. 3.1. The UTF8 Command The UTF8 command enables UTF-8 mode. The UTF8 command has no parameters. Maildrops can natively store UTF-8 or be limited to ASCII. UTF-8 mode has no effect on messages in an ASCII-only maildrop. Messages in native UTF-8 maildrops can be ASCII or UTF-8 using internationalized headers [RFC5335] and/or 8bit content-transfer- encoding, as defined in MIME Section 2.8 [RFC2045]. In UTF-8 mode, both UTF-8 and ASCII messages are sent to the client as-is (without conversion). When not in UTF-8 mode, UTF-8 messages in a native UTF-8 maildrop MUST be down-converted (downgraded) to comply with unextended POP and Internet Mail Format. POP servers (unlike SMTP and Submit servers) are not required to use "Downgrading Mechanism for Email Address Internationalization" [RFC5504]. Discussion: The main argument against a single required mechanism for downgrading by a POP server is that the only clients that have any use for a standardized downgraded message (because they wish to interpret downgrade headers, for example) are ones that can support UTF-8 and, hence, will issue the UTF8 command in the first place. The counter argument to this is that clients that do not support UTF-8 might be upgraded in the future; it's desirable for an upgraded client to be capable of interpreting prior downgraded messages in the local mail store, which is most likely if the messages were downgraded using one standardized procedure. Gellens & Newman Experimental [Page 7]
RFC 5721 POP3 Support for UTF-8 February 2010 Therefore, while POP servers are not required to use "Downgrading Mechanism for Email Address Internationalization" [RFC5504], there are advantages to them doing so. Note that even in UTF-8 mode, MIME binary content-transfer-encoding is still not permitted. The octet count (size) of a message reported in a response to the LIST command SHOULD match the actual number of octets sent in a RETR response (not counting byte-stuffing). Sizes reported elsewhere, such as in STAT responses and non-standardized, free-form text in positive status indicators (following "+OK") need not be accurate, but it is preferable if they are. Discussion: Mail stores are either ASCII or native UTF-8, and clients either issue the UTF8 command or not. The message needs converting only when it is native UTF-8 and the client has not issued the UTF-8 command, in which case the server must down-convert it. The down- converted message may be larger. The server may choose various strategies regarding down-conversion, which include when to down- convert, whether to cache or store the down-converted form of a message (and if so, for how long), and whether to calculate or retain the size of a down-converted message independently of the down- converted content. If the server does not have immediate access to the accurate down-converted size, it may be faster to estimate rather than calculate it. Servers are expected to normally follow the RFC 1939 [RFC1939] text on using the "exact size" in a scan listing, but there may be situations with maildrops containing very large numbers of messages in which this might be a problem. If the server does estimate, reporting a scan listing size smaller than what it turns out to be could be a problem for some clients. In summary, it is better for servers to report accurate sizes, but if this is not possible, high guesses are better than small ones. Some POP servers include the message size in the non-standardized text response following "+OK" (the 'text' production of RFC 2449 [RFC2449]), in a RETR or TOP response (possibly because some examples in POP3 [RFC1939] do so). There has been at least one known case of a client relying on this to know when it had received all of the message rather than following the POP3 [RFC1939] rule of looking for a line consisting of a termination octet (".") and a CRLF pair. While any such client is non-compliant, if a server does include the size in such text, it is better if it is accurate. Clients MUST NOT issue the STLS command [RFC2595] after issuing UTF8; servers MAY (but are not required to) enforce this by rejecting with an "-ERR" response an STLS command issued subsequent to a successful Gellens & Newman Experimental [Page 8]
RFC 5721 POP3 Support for UTF-8 February 2010 UTF8 command. (Because this is a protocol error as opposed to a failure based on conditions, an extended response code [RFC2449] is not specified.) 3.2. USER Argument to UTF8 Capability If the USER argument is included with this capability, it indicates that the server accepts UTF-8 user names and passwords. Servers that include the USER argument in the UTF8 capability response SHOULD apply SASLprep [RFC4013] to the arguments of the USER and PASS commands. A client or server that supports APOP and permits UTF-8 in user names or passwords MUST apply SASLprep [RFC4013] to the user name and password used to compute the APOP digest. When applying SASLprep [RFC4013], servers MUST reject UTF-8 user names or passwords that contain a Unicode character listed in Section 2.3 of SASLprep [RFC4013]. When applying SASLprep to the USER argument, the PASS argument, or the APOP username argument, a compliant server or client MUST treat them as a query string (i.e., unassigned Unicode codepoints are allowed). When applying SASLprep to the APOP password argument, a compliant server or client MUST treat them as a stored string (i.e., unassigned Unicode codepoints are prohibited). The client does not need to issue the UTF8 command prior to using UTF-8 in authentication. However, clients MUST NOT use UTF-8 in USER, PASS, or APOP commands unless the USER argument is included in the UTF8 capability response. The server MUST reject UTF-8 user names or passwords that fail to comply with the formal syntax in UTF-8 [RFC3629]. Use of UTF-8 in the AUTH command is governed by the POP3 SASL [RFC5034] mechanism. 4. Native UTF-8 Maildrops When a POP3 server uses a native UTF-8 maildrop, it is the responsibility of the server to comply with the POP3 base specification [RFC1939] and Internet Message Format [RFC5322] when not in UTF-8 mode. Mechanisms for 7-bit downgrading to help comply with the standards are described in "Downgrading Mechanism for Email Address Internationalization" [RFC5504]. Gellens & Newman Experimental [Page 9]
RFC 5721 POP3 Support for UTF-8 February 2010 5. IANA Considerations This specification adds two new capabilities ("UTF8" and "LANG") to the POP3 capability registry [RFC2449]. 6. Security Considerations The security considerations of UTF-8 [RFC3629] and SASLprep [RFC4013] apply to this specification, particularly with respect to use of UTF-8 in user names and passwords. The "LANG *" command might reveal the existence and preferred language of a user to an active attacker probing the system if the active language changes in response to the USER, PASS, or APOP commands prior to validating the user's credentials. Servers MUST implement a configuration to prevent this exposure. It is possible for a man-in-the-middle attacker to insert a LANG command in the command stream, thus making protocol-level diagnostic responses unintelligible to the user. A mechanism to integrity- protect the session, such as Transport Layer Security (TLS) [RFC2595] can be used to defeat such attacks. Modifying server authentication code (in this case, to support UTF-8) needs to be done with care to avoid introducing vulnerabilities (for example, in string parsing). The UTF8 command description (Section 3.1) contains a discussion on reporting inaccurate sizes. An additional risk to doing so is that, if a client allocates buffers based on the reported size, it may overrun the buffer, crash, or have other problems if the message data is larger than reported. 7. References 7.1. Normative References [RFC1939] Myers, J. and M. Rose, "Post Office Protocol - Version 3", STD 53, RFC 1939, May 1996. [RFC2045] Freed, N. and N. Borenstein, "Multipurpose Internet Mail Extensions (MIME) Part One: Format of Internet Message Bodies", RFC 2045, November 1996. [RFC2047] Moore, K., "MIME (Multipurpose Internet Mail Extensions) Part Three: Message Header Extensions for Non-ASCII Text", RFC 2047, November 1996. Gellens & Newman Experimental [Page 10]
RFC 5721 POP3 Support for UTF-8 February 2010 [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC2277] Alvestrand, H., "IETF Policy on Character Sets and Languages", BCP 18, RFC 2277, January 1998. [RFC2449] Gellens, R., Newman, C., and L. Lundblade, "POP3 Extension Mechanism", RFC 2449, November 1998. [RFC3629] Yergeau, F., "UTF-8, a transformation format of ISO 10646", STD 63, RFC 3629, November 2003. [RFC4013] Zeilenga, K., "SASLprep: Stringprep Profile for User Names and Passwords", RFC 4013, February 2005. [RFC4647] Phillips, A. and M. Davis, "Matching of Language Tags", BCP 47, RFC 4647, September 2006. [RFC5322] Resnick, P., Ed., "Internet Message Format", RFC 5322, October 2008. [RFC5335] Abel, Y., "Internationalized Email Headers", RFC 5335, September 2008. [RFC5646] Phillips, A. and M. Davis, "Tags for Identifying Languages", BCP 47, RFC 5646, September 2009. 7.2. Informative References [RFC2595] Newman, C., "Using TLS with IMAP, POP3 and ACAP", RFC 2595, June 1999. [RFC4952] Klensin, J. and Y. Ko, "Overview and Framework for Internationalized Email", RFC 4952, July 2007. [RFC5034] Siemborski, R. and A. Menon-Sen, "The Post Office Protocol (POP3) Simple Authentication and Security Layer (SASL) Authentication Mechanism", RFC 5034, July 2007. [RFC5504] Fujiwara, K. and Y. Yoneya, "Downgrading Mechanism for Email Address Internationalization", RFC 5504, March 2009. Gellens & Newman Experimental [Page 11]
RFC 5721 POP3 Support for UTF-8 February 2010 Appendix A. Design Rationale This non-normative section discusses the reasons behind some of the design choices in the above specification. Having servers perform up-conversion so that, at a minimum, RFC2047- encoded words are decoded into UTF-8 is tempting, since this is an area that clients often fail to correctly implement. However, after much discussion, the EAI group felt that the benefits did not justify the burden. Due to interoperability problems with RFC 2047 and limited deployment of RFC 2231, it is hoped these 7-bit encoding mechanisms can be deprecated in the future when UTF-8 header support becomes prevalent. USER is optional because the implementation burden of SASLprep [RFC4013] is not well understood, and mandating such support in all cases could negatively impact deployment. While it is possible to provide useful examples for language negotiation without support for non-ASCII characters, it is difficult to provide useful examples for commands specifically designed to use the UTF-8 charset un-encoded when the document format is limited to ASCII. As a result, there are no plans to provide examples for that part of the specification as long as this remains an experimental proposal. However, implementers of this specification are encouraged to provide examples to the document authors for a future revision. While down-conversion of native UTF-8 messages is mandatory in the absence of the UTF8 command, servers are not required to use "Downgrading Mechanism for Email Address Internationalization" [RFC5504] to do so. As clients are upgraded with UTF-8 support and the ability to intelligently handle (e.g., display and reply to) UTF-8 messages that were downgraded in transit, it is better if they are also able to handle messages in the local mail store that were downgraded by the POP server. This is more likely if the POP server downgrades messages using the same mechanism as an SMTP server. Appendix B. Acknowledgments Thanks to John Klensin, Tony Hansen, and other EAI working group participants who provided helpful suggestions and interesting debate that improved this specification. Gellens & Newman Experimental [Page 12]
RFC 5721 POP3 Support for UTF-8 February 2010 Authors' Addresses Randall Gellens QUALCOMM Incorporated 5775 Morehouse Drive San Diego, CA 92651 US EMail: Chris Newman Sun Microsystems 800 Royal Oaks Monrovia, CA 91016-6347 US EMail: Gellens & Newman Experimental [Page 13]


[Home] [Full RFC index] [RFC humour] [Our technology]

Copyright © Inter-Corporate Computer & Network Services, Inc.  All rights reserved.
All trademarks and RFC contents are the property of their respective owners.